Page 63 - UNITRO Alarm Annunciators
P. 63
Connection diagram ME 16-P logic
Technical data:
21. Type of construction: 30. Resolution:
control board housing aluminum ≥ 1ms (opto-mos)
144 x 144 x 160 + 25mm ≥ 10ms (Relay)
(cutting for installation 138 x 138 + 1mm) 31. Switch-on delay:
22. Degree of protection: programmable from 50ms to 10min
front: IP50, with full-view (in steps of 50ms, 2s and 1min)
acrylic glass doors IP54 32. Minimum signal duration:
housing: IP20 1ms
23. Weight: 33. First-up discrimination:
max. 2000g 1ms
24. Climatic conditions: 34. Flashing frequencies:
in accordance with UNITRO-PSC-Standard 2Hz / 0.5Hz
25. Connection: 35. Power loss:
screw-type terminals/ plug connection max. 6W + 16x 0.5W
connection with screw flange max. 2.5 mm²
36. Relay outputs:
26. Supply voltage: max. 5A 250V AC,
24V AC/DC 3A 30V DC
48-60V AC/DC
110/125V AC/DC 37. Contactless signal outputs:
opto-mos switch max. 300V DC, 100mA
220/240V AC/DC
voltage-adapted 38. Parameterization interface:
Mini USB interface for parameterization
27. Alarm signal nominal voltage:
24V AC to 230V AC with software, used with Windows 7 Pro
or higher
24V DC to 240V DC
voltage-adapted, voltage tolerance ±10% 39. Leakage distances and clearances:
in accordance with
28. Input level for signal inputs:
at 24V AC / DC 8mA UNITRO-PSC-Standard
at 230V AC 7mA 40. EMC, immunity to interference:
at 60V DC 4mA UNITRO-PSC-Standard, immunity higher
at 110 / 125V DC 3mA degrees of severity according to the
at 240V DC 2mA actual generic standards DIN EN 61000
29. Data retention in the absence of power:
20 years
subject to change Page 72