Page 41 - LON-bus components

Connection diagram SmartManager-GSM

Technical data:
1. Type of construction: 11. LED display:
snap-on housing for DIN-Rail mounting LED yellow: GSM/GPRS module ready
108 (+36 (LON)+34 (Modem))x 90 x 64 mm LED green: ethernet ready
LED green: power on
2. Degree of protection: Service LED yellow: flashing = device not
IP20
initialized
3. Weight: continuous light = error
approx. 350g LED geen: PKD (packed detect) lights up
during data transmission
4. Climatic conditions: LED yellow: BIU (band in use) lights at the
temperature: 0-50 °C, reception or if occupied band
humidity: 0-90 % (not condensing)
12. Transmission:
5. Connection: LON-FTT: two wire (twisted-pair),
screw-type terminals/ plug connection 78kbps, max. 2,7km
max. 2,5mm²
LON-PLT: two wire (C-band 125-145kHz)
6. Ethernet interface: 4,8kBit/s, max. 30km
10/100 BaseT RJ45 interface in conjunction with phase coupler also
power line transmission on the 230/400V AC
7. USB interface:
for data logging via USB stick 13. Parameterization:
via standard browser
8. Supply voltage:
24V DC, max. 450mA ± 10-15% 14. Leakage distances and clearances:
120V bis 230V AC max. 60mA ± 10-15% in accordance with UNITRO-Standard
180V bis 360V DC max. 60mA ± 10-15%
15. EMC, immunity of interference:
9. Processor: UNITRO-Standard,
32bit RISC-Processor, in accordance with EN 61000
Neuron 3150
®
10. UMTS module:
Quad-band GSM-/Tri-band UMTS
Temperature range: -30° C to + 70° C
with slot for SIM card

subject to change Page 158